Simple
postforming layout:
FORM
2.
FORM
1.
FORM
3.
Forms
are carried out in numerical order. Handling is made easier with the aid of
removable support packing's placed at A and B. External form C is secured with
a 90 degree filler or resin after forming.
After forming internal form 4, a pre-machined filler piece is screwed into
position with the form at 90 degrees, or alternatively quick setting resin
is applied.
Dimension A for the internal form performed on the cove heater is 20 mm.
Dimension B is dependent on the thickness of the work-piece being formed.
A standard external form, achieved with ease.
A
bull-nose section form with under wrap using the pre-set former.
A
bull-nose section and under wrap with a down stand fitted.
Standard
internal forms achieved with ease on the radius of the cove bar.
Below are some of the most
widley used laminate fabrication sections, all of these are easily and quickly
atcheived with Heilen laminate forming machines. All finished forms will have
a super tight bond between laminate and work-piece, using solvent based adhesives
or water based.
